Problem in communicating through NRf24L01 Module wıth Mega

I am running into this seemingly common problem one faces when using MEGA with the radio module. My experimental Settings are the following :

  • MEGA 2560 as Receiver
  • UNO R3 as Sender
  • NRF24L01 radio Module
  • Testing pingpair example from library with the following modifications for MEGA :

    RF24 radio(40,53);

Things I have already tried :

  • Using capacitor as a decoupling device across 3.3V of MEGA
  • Using external power supply instead

I have also noticed that the MEGA is unable to detect the correct addresss provided in the example code :

const uint64_t pipes[2] = { 0xF0F0F0F0E1LL, 0xF0F0F0F0D2LL };

The logs for both the receiver and transmitter are :Problem in communicating through NRf24L01 Module wıth Mega

Problem in communicating through NRf24L01 Module wıth Mega


Category: arduino Time: 2016-07-28 Views: 0
Tags: arduino

Related post

  • What is the typical range of a nRF24L01+ module with PCB antenna? 2012-06-04

    I have seen the nRF24L01+ ( ) module linked before as a solution for low cost short range communication between MCUs, but find

  • Why this nrf24l01 module has two VCC and two GND? 2015-06-13

    This question already has an answer here: Reason of multiple GND and VCC on an IC 4 answers This module has two GND and VCC pins: However, this module and this module only have one of each. Why is that? EDIT: I know most MCU's have a lot of 3V3, 5V a

  • Problem in communication between STM32F429 with Ethernet PHY 2015-04-07

    I have problem in communication between STM32F429 with Ethernet PHY. I have Emcraft SOM(system on module) board, STM32F429 and Micrel Ethernet PHY IC interfaced or connected on SOM Board. I have taken one sample code of TCP/IP stack, Functionality of

  • Wireless Module with over 1.5Km range? 2011-01-31

    I'm working with Micro Controller Mega-32 (SMD). I'm looking for a Wireless module to transfer and receive the data that I created with the micro. Could you please guide me ? --------------Solutions------------- You could get to that range in the 900

  • How to handle enabling new modules with Drush via makefile 2013-06-05

    At work we are moving to getting our new sites set up in git and doing local development. So far I've created a drush make file along with an installation profile, and I have this scripted via puppet so that when a user does a fresh clone of a reposi

  • SitePoint Podcast #121: Online Community Roundtable Part 2 with Matthew Haughey and Sarah Hawk 2011-07-15

    Episode 121 of The SitePoint Podcast is now available! This week the panel is made up of regular host Patrick O'Keefe (@iFroggy) with guests Sarah Hawk (@ilovethehawk) and Matt Haughey (@mathowie). The panel discuss some more in depth areas and chall

  • Similar modules with Inline Entity form 2013-05-12

    I am interested in modules similar with Inline Entity form,so as to create and reference nodes during the node creation. There are some modules in a list but I cannot find them now. Does anyone know this?thanks --------------Solutions------------- En

  • Low power serial bluetooth module with Arduino 2014-07-31

    I plan to use the HC-06 serial bluetooth module with an Arduino Leonardo. To my knowledge, the Arduino's serial pins output at 5V with 40mA of current. The HC-06's datasheet says it will accept input at 3V - 4.2V with 20mA - 40mA of current. I'm more

  • Interprocess communication between 3 modules 2016-01-28

    I am looking for advice on the best approach for doing inter-process communication. The solution consists of 3 projects. GUI: This will only display messages to the user and get user input Windows Service: Communicates with the UI and runs the 3rd mo

  • Suggestion for a GPS module with helical/omnidirectional antenna 2011-01-16

    I'm looking around for a decent GPS module for a project of mine. The Sparkfun GPS Buying Guide is nice, but focuses mostly on modules with patch antennae. My project is a wrist- or upper-arm-mounted GPS logger. It will be displayless and log continu

  • Adding fmath editor plugin to ckeditor through wysiwyg module 2012-02-01

    How to add fmath editor plugin to ckeditor through wysiwyg module. The link ( provides documentation for ckeditor module but it does not explains the steps for wysiwyg module. --------------Solutions------

  • Provision a file through a module (CAML) and choose its Content Type 2012-06-20

    How do you provision a file through a module (CAML) and choose its Content Type? Is it even possible? The normal behavior for a new item is to get the default content type. --------------Solutions------------- If you look at C:\Program Files\Common F

  • Disable "longhaul" kernel module with a GRUB command? 2012-07-08

    I've got a problem with a VIA C3 (1GHz)-system: the system freezes immediately when the CPU frequency goes under 731MHz because of an incompatibility with the (not completely implemented) i686 commands and a powersave feature of the kernel. There is

  • Why modules with no variables? 2012-07-12

    I was reading some code, in particular, recipe 4.13 on unification pattern-matching in Sal Mangano's Mathematica Cookbook, and there were many instances of Modules with no variables in them, such as Lookup[x_] := Module[{}, x /. $bindings] i didn't u

  • How can I package a module with a jquery-plugin in a sober way? 2012-09-14

    I'm almost getting crazy with this... My Problem: I have a module with its own css and jquery-plugin. When i add it directly to the via scripts[] everything is fine. But when i try to integrate it with drupal_add_js() from out of the mymod

  • LCD modules with I2C or SPI interface 2012-11-24

    I would like to add an LCD to my current design (a project that is to be produced in low volume, around 50 to 100 units). A small display size (around 8 or 16 characters) should be plenty since it is for measurement readout, and I would like to keep

  • Trying to rewrite url for a custom module with an extra custom variable using PathAuto 2013-06-16

    I needed to create a custom module to show product information. It's a custom module because the data comes from a remote database. This module has a block which I add to a basic page. (It was my first drupal website from some time ago, and I know it

  • Using Infinite Scroll module with Views paging: Detrimental to Google SEO? 2013-08-21

    I love using the Infinite Scroll module with Views. But does Google limit indexing to to only those first bunch of nodes which appear in the view? I'm guessing that when using a regular pager, Google will dig deeper and index all subsequent pages in

  • How do I use the Print Module with a Custom Form Module? 2013-10-22

    I have searched and searched but have not found a definitive answer or direction. I've installed the Print module (Printer, email and PDF) and have it successfully working when associated with content types. My problem however, is making it work with

iOS development

Android development

Python development

JAVA development

Development language

PHP development

Ruby development


Front-end development


development tools

Open Platform

Javascript development

.NET development

cloud computing


Copyright (C), All Rights Reserved.

processed in 1.617 (s). 13 q(s)