Programming SAM uC family without ATmel Studio

I've designed a board that used a SAM uC (Cortex M0+). I don't want to use the ATmel Stduio, I want to learn how to use eclipse and arm-gcc and OpenOCD ( still can't understand, what this one is for ?). So my question is it possible to do that and if yes, does anyone has hint how can I proceed ?

I've installed the 3 parts,and this is the farthest I could get: Programming SAM uC family without ATmel Studio

Replay

Category: arm Time: 2016-07-28 Views: 0
Tags: eclipse arm

Related post

  • Atmel Studio 6 Simulator Not Showing Up 2013-09-03

    I was looking to run the simulator for an AVR controller, but when I went to set my debugging tools as outlined in this video- http://www.youtube.com/watch?v=9QlDSNeuAdY I do not have anything show up under the drop down both on my PC and Mac running

  • Using AVR Dragon with Atmel Studio 6 2013-06-19

    I have an Xmega Xplained 128A1 kit along with an AVR Dragon. Can anyone help me with the steps to be followed for programming Xmega using Dragon using Atmel Studio 6? I have downloaded the material from the Atmel website and have the necessary codes

  • Better workflow in Atmel Studio 6 for building and transferring program 2013-06-30

    After having modified my code in Atmel Studio 6, I write the program to my MCU in the following steps: Click Build or F7 Click Device Programming or Ctrl+Shift+P Click Apply (to choose programmer+device+protocol) Click Memory Click Program How can I

  • Program to simulate seven segment display in atmel studio 2013-05-07

    I am using Atmel studio for the programming of atmega64 microcontrollers with a Cerebot board II. Firstly, is there a program that can simulate a seven segment display device as if I was looking at the device in front of me plugging it into a Cerebot

  • How can I program Mega2560 with Atmel Studio 6.2 2014-07-24

    I have got the SainSmart Mega2560. The problem is now: how can I program it with Atmel Studio 6.2? I can find no way to upload code, because the controller is not in listed and with ISP I can not do it, because STK600 is needed which I don't have! Is

  • Program ATtiny45 with Atmel Studio and Arduino ISP 2013-11-21

    Is it possible for me to somehow upload the application I have written with C++ in Atmel Studio with the Arduino ISP that I can use in the Arduino IDE? I have no idea how to do this, and I also have no idea where to set the fuses and what to set them

  • How can I set up SPI using Atmel Studio and C code for ARM processor? 2015-04-24

    I am trying to program the SAM3x8E chip on the Arduino Due through Atmel Studio. I would like to be able to control a digital resistor over the SPI interface with the SAM3 chip. I am running Atmel Studio 6.2. I have NO PROBLEM getting things to work

  • How to set the default program for opening files without an extension in Windows? 2009-07-27

    How to set the default program for opening files without an extension in Windows? --------------Solutions------------- From Windows IT pro: Normal files with an extension can have a program associated however this is not the case with files that don'

  • How different is the Arduino language than Atmel Studio language? 2013-10-07

    I see that on the official Arduino website, the reference page contains the functions and vales you would use specified to the Arduino compiler. http://arduino.cc/en/Reference/HomePage What would you use instead, if you are working with Atmel Studio?

  • Atmel Studio JTAG Debugger Behaviour 2014-01-09

    The qeustion: I would like to know what is different about the way JTAG treats the "step over" and "step into" commands. Background: I am trying to set a GPNVM bit on a SAM3N (ARM Cortex M3) chip by using the In-application programming

  • C Documentation for AVR Atmel Studio 2014-07-29

    I am new to AVR programming and have tried couple of tests on assembly language and were successful. However, I would like to try out programming in C with Atmel Studio. Could somebody tell me where I can find the complete documentation of what is av

  • Is it possible to power target microcontroller from AVRISP mkII using Atmel Studio 2014-09-19

    I'm using the Atmel Studio IDE and a AVRISP mkII to program microcontrollers. I've always powered the microcontrollers to be programmed with an external power supply but I was wondering if it is possible to power the target microcontroller through th

  • How to use the simulation in atmel-studio properly? 2015-02-21

    I wanted to start a bit µC development with the Atmel Studio 6.2, and therefore my first step was to compile a small program for simply switching a pin from HIGH to LOW and back all the time. I took the source code from here: http://jaxcoder.com/Proj

  • Is it possible to upload/download memory from/to external files in Atmel Studio? 2015-03-25

    In the old AVR Studio 4 there was an easy option to upload eepeom to the chip from an external file, and also to quickly download either the whole or a specified range of flash or eeprom or RAM memory and write it to an external file. How is it possi

  • Attiny10 not triggering timer overflow interrupt while simulation (Atmel Studio 6) 2015-04-20

    I have problems simulating the timer overflow in Atmel Studio 6. The code is for an Attiny10 and looks like below. As far as I know I set all the neccessary bits to enable the counter (which works in simulation) and the interrupt (which doesnt work i

  • Modifying UDRx registers in the Atmel Studio 6.2 Simulator 2015-08-14

    I'm currently working on a system which makes use of an Atmega640. In order to aid debugging I'm trying to use the simulator within Atmel Studio to run the code and observe what it does. The problem is that most of the chips activity depends on data

  • AT91SAM7A3 not in kit list in Atmel Studio 6.2 2015-09-02

    I am trying to use Atmel Studio 6.2 and Atmel ICE to program AT91SAM7A3, but I could not find AT91SAM7A3 in the kit list of Atmel Studio 6.2. What should I do next if I want to load my code in AT91SAM7A3?

  • Using FreeRTOS in Atmel Studio 6.2 2015-09-09

    I have been trying to create an atmel project that uses FreeRTOS on an ATmega328 but I cannot seem to get it to work. I have read several article on how to do this, especially this and this one (which is in french but google translate should do the t

  • Allow Standard User to Run Program as Local Admin Without Elevation Prompt 2015-11-05

    I work in an environment where local admin privileges for users isn't allowed. At all. This is very nice, but can be also be a pain when employees who must have local admin permissions to run a program or install software that requires elevated privi

iOS development

Android development

Python development

JAVA development

Development language

PHP development

Ruby development

search

Front-end development

Database

development tools

Open Platform

Javascript development

.NET development

cloud computing

server

Copyright (C) avrocks.com, All Rights Reserved.

processed in 1.157 (s). 13 q(s)