Thesis chapters not starting on rectopage

I've downloaded a thesis .tex1 file from my university. In it, there is a section that reads that chapters and front matter sections will appear on a recto (right handed) page. When I compile, this is not the case.

Shown below is the preamble

\documentclass[letterpaper,12pt,titlepage,oneside,final]{book}  % For PDF, suitable for double-sided printing, change the PrintVersion variable below % to "true" and use this \documentclass line instead of the one above: %\documentclass[letterpaper,12pt,titlepage,openright,twoside,final]{book}  % Some LaTeX commands I define for my own nomenclature. % If you have to, it's better to change nomenclature once here than in a  % million places throughout your thesis! \newcommand{\package}[1]{\textbf{#1}} % package names in bold text \newcommand{\cmmd}[1]{\textbackslash\texttt{#1}} % command name in tt font  \newcommand{\href}[1]{#1} % does nothing, but defines the command so the % print-optimized version will ignore \href tags (redefined by hyperref pkg). %\newcommand{\texorpdfstring}[2]{#1} % does nothing, but defines the command % Anything defined here may be redefined by packages added below...  % This package allows if-then-else control structures. \usepackage{ifthen} \newboolean{PrintVersion} \setboolean{PrintVersion}{true}  % CHANGE THIS VALUE TO "true" as necessary, to improve printed results for hard copies % by overriding some options of the hyperref package below.  %\usepackage{nomencl} % For a nomenclature (optional; available from \usepackage{amsmath,amssymb,amstext} % Lots of math symbols and environments \usepackage[pdftex]{graphicx} % For including graphics N.B. pdftex graphics driver   % Hyperlinks make it very easy to navigate an electronic document. % In addition, this is where you should specify the thesis title % and author as they appear in the properties of the PDF document. % Use the "hyperref" package  % N.B. HYPERREF MUST BE THE LAST PACKAGE LOADED; ADD ADDITIONAL PKGS ABOVE \usepackage[pdftex,letterpaper=true,pagebackref=false]{hyperref} % with basic options % N.B. pagebackref=true provides links back from the References to the body text. This can cause trouble for printing. \hypersetup{     plainpages=false,       % needed if Roman numbers in frontpages     pdfpagelabels=true,     % adds page number as label in Acrobat's page count     bookmarks=true,         % show bookmarks bar?     unicode=false,          % non-Latin characters in Acrobat?s bookmarks     pdftoolbar=true,        % show Acrobat?s toolbar?     pdfmenubar=true,        % show Acrobat?s menu?     pdffitwindow=false,     % window fit to page when opened     pdfstartview={FitH},    % fits the width of the page to the window     pdftitle={uWaterloo\ LaTeX\ Thesis\ Vaccines},    % title: CHANGE THIS TEXT!         pdfauthor={Demetri Pananos},    % author: CHANGE THIS TEXT! and uncomment this line         pdfsubject={Mathematical Epidemiology},  % subject: CHANGE THIS TEXT! and uncomment this line     %    pdfkeywords={keyword1} {key2} {key3}, % list of keywords, and uncomment this line if desired     pdfnewwindow=true,      % links in new window     colorlinks=true,        % false: boxed links; true: colored links     linkcolor=blue,         % color of internal links     citecolor=blue,        % color of links to bibliography     filecolor=magenta,      % color of file links     urlcolor=cyan           % color of external links } \ifthenelse{\boolean{PrintVersion}}{   % for improved print quality, change some hyperref options     \hypersetup{    % override some previously defined hyperref options         %    colorlinks,%         citecolor=black,%         filecolor=black,%         linkcolor=black,%         urlcolor=black} }{} % end of ifthenelse (no else)  % Setting up the page margins... % uWaterloo thesis requirements specify a minimum of 1 inch (72pt) margin at the % top, bottom, and outside page edges and a 1.125 in. (81pt) gutter % margin (on binding side). While this is not an issue for electronic % viewing, a PDF may be printed, and so we have the same page layout for % both printed and electronic versions, we leave the gutter margin in. % Set margins to minimum permitted by uWaterloo thesis regulations: \setlength{\marginparwidth}{0pt} % width of margin notes % N.B. If margin notes are used, you must adjust \textwidth, \marginparwidth % and \marginparsep so that the space left between the margin notes and page % edge is less than 15 mm (0.6 in.) \setlength{\marginparsep}{0pt} % width of space between body text and margin notes \setlength{\evensidemargin}{0.125in} % Adds 1/8 in. to binding side of all  % even-numbered pages when the "twoside" printing option is selected \setlength{\oddsidemargin}{0.125in} % Adds 1/8 in. to the left of all pages % when "oneside" printing is selected, and to the left of all odd-numbered % pages when "twoside" printing is selected \setlength{\textwidth}{6.375in} % assuming US letter paper (8.5 in. x 11 in.) and  % side margins as above \raggedbottom  % The following statement specifies the amount of space between % paragraphs. Other reasonable specifications are \bigskipamount and \smallskipamount. \setlength{\parskip}{\medskipamount}  % The following statement controls the line spacing.  The default % spacing corresponds to good typographic conventions and only slight % changes (e.g., perhaps "1.2"), if any, should be made. \renewcommand{\baselinestretch}{1.5} % this is the default line space setting  % By default, each chapter will start on a recto (right-hand side) % page.  We also force each section of the front pages to start on  % a recto page by inserting \cleardoublepage commands. % In many cases, this will require that the verso page be % blank and, while it should be counted, a page number should not be % printed.  The following statements ensure a page number is not % printed on an otherwise blank verso page. \let\origdoublepage\cleardoublepage \newcommand{\clearemptydoublepage}{%     \clearpage{\pagestyle{empty}\origdoublepage}} \let\cleardoublepage\clearemptydoublepage   %---Packages--- \usepackage[latin1]{inputenc} \usepackage{float} \usepackage{caption} \usepackage{subcaption} \usepackage{enumerate} \usepackage{array} \usepackage[nocompress]{cite} %I think this is so \cite{} orders references numerically  \usepackage{cleveref} %Allows for referencing fig, eq, sections automatically \usepackage{dirtytalk} %Easy quotations \usepackage{mathtools} %For := definition \usepackage{bm} %bold math for bold epsilon in 1.5  %---New Commands for ease--- \newcommand{\R}{\mathcal{R}_0} %R nought \newcommand{\norm}[1]{\left\lVert#1\right\rVert} %Norms in 1.5 \newcommand\fxtxt[1]{\rotatebox[origin=left]{45}{\makebox[3ex][l]{#1}}} %countvectorized matrix in 1.4 \newcommand{\prob}[1]{\operatorname{Pr}\left({#1}\right)} \DeclareMathOperator*{\argmax}{arg\,max}   %Change how \cref references things \crefname{equation}{equation}{equations} \crefname{figure}{figure}{figures}  %Change section and table of contents numbering depths to include subsubsection  \setcounter{tocdepth}{4} 

Perhaps I use another package which conflicts with the setting? I'm not sure.


Category: formatting Time: 2016-07-29 Views: 0

Related post

iOS development

Android development

Python development

JAVA development

Development language

PHP development

Ruby development


Front-end development


development tools

Open Platform

Javascript development

.NET development

cloud computing


Copyright (C), All Rights Reserved.

processed in 0.117 (s). 12 q(s)