Ubuntu Gnome dependency problems btwn python3, gconf2, gnupg2, etc. Help please?

My setup:

Ubuntu 16.04 with Ubuntu-Gnome3-Desktop/Shell. I immediately performed sudo apt-get upgrade after install, no issues there. Everything worked beautifully until I attempted to install Kali-Linux-2016.1 packages using the Katoolin tool package. Repositories were successfully added, packages were successfully downloaded, but then when I tried sudo apt-get upgrade I ran into some problems as you'll see below in the text taken directly from my terminal

[email protected]:~$ sudo apt autoremove  Reading package lists... Done Building dependency tree        Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies:  gnupg2 : Depends: gnupg-agent (= 2.1.11-6ubuntu2) E: Unmet dependencies. Try using -f.   [email protected]:~$ sudo apt-get install gnupg-agent  Reading package lists... Done Building dependency tree        Reading state information... Done gnupg-agent is already the newest version (2.1.11-7). You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies:  gnupg2 : Depends: gnupg-agent (= 2.1.11-6ubuntu2) E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).  [email protected]:~$ sudo apt-get -f install  Reading package lists... Done Building dependency tree        Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required:   libasn1-8-heimdal libgssapi3-heimdal libhcrypto4-heimdal   libheimbase1-heimdal libheimntlm0-heimdal libhx509-5-heimdal   libkrb5-26-heimdal libroken18-heimdal libwind0-heimdal linux-sound-base Use 'sudo apt autoremove' to remove them. The following additional packages will be installed:   gnupg2 Suggested packages:   gnupg-doc parcimonie xloadimage The following packages will be upgraded:   gnupg2 1 upgraded, 0 newly installed, 0 to remove and 969 not upgraded. 70 not fully installed or removed. Need to get 0 B/1,389 kB of archives. After this operation, 3,555 kB of additional disk space will be used. Do you want to continue? [Y/n] Y dpkg: dependency problems prevent processing triggers for gconf2:  gconf2 depends on python3:any; however:   Package python3 is not configured yet.  dpkg: error processing package gconf2 (--configure):  dependency problems - leaving triggers unprocessed dpkg: dependency problems prevent processing triggers for gconf2:  gconf2 depends on python3:any; however:   Package python3 is not configured yet. #^^^ These dpkg errors repeat maybe 50 times, I have edited out most repeats for your sake  gconf2  gconf2 #(This repeats ~50 times)  gconf2  gconf2  gconf2 Processing was halted because there were too many errors. E: Sub-process /usr/bin/dpkg returned an error code (1)  [email protected]:~$ sudo apt autoremove  Reading package lists... Done Building dependency tree        Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies:  gnupg2 : Depends: gnupg-agent (= 2.1.11-6ubuntu2) E: Unmet dependencies. Try using -f.  [email protected]:~$ sudo apt-get remove python3  Reading package lists... Done Building dependency tree        Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies:  apparmor : Depends: python3:any  apport : Depends: python3 but it is not going to be installed  apport-gtk : Depends: python3 but it is not going to be installed  aptdaemon : Depends: python3 but it is not going to be installed              Depends: python3:any (>= 3.2~)  apturl : Depends: python3:any (>= 3.3.2-2~)  apturl-common : Depends: python3:any (>= 3.3.2-2~) #...... (many depend on python3)  usb-creator-gtk : Depends: python3:any (>= 3.3.2-2~)  xdiagnose : Depends: python3:any (>= 3.3.2-2~) E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).  [email protected]:~$ sudo apt-get autoremove  Reading package lists... Done Building dependency tree        Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies:  gnupg2 : Depends: gnupg-agent (= 2.1.11-6ubuntu2) E: Unmet dependencies. Try using -f.  [email protected]:~$ sudo apt-get install python3  Reading package lists... Done Building dependency tree        Reading state information... Done python3 is already the newest version (3.5.1-4). You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies:  gnupg2 : Depends: gnupg-agent (= 2.1.11-6ubuntu2) E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).  [email protected]:~$ sudo apt-get -f install  Reading package lists... Done Building dependency tree        Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required:   libasn1-8-heimdal libgssapi3-heimdal libhcrypto4-heimdal   libheimbase1-heimdal libheimntlm0-heimdal libhx509-5-heimdal   libkrb5-26-heimdal libroken18-heimdal libwind0-heimdal linux-sound-base Use 'sudo apt autoremove' to remove them. The following additional packages will be installed:   gnupg2 Suggested packages:   gnupg-doc parcimonie xloadimage The following packages will be upgraded:   gnupg2 1 upgraded, 0 newly installed, 0 to remove and 969 not upgraded. 70 not fully installed or removed. Need to get 0 B/1,389 kB of archives. After this operation, 3,555 kB of additional disk space will be used. Do you want to continue? [Y/n] Y dpkg: dependency problems prevent processing triggers for gconf2:  gconf2 depends on python3:any; however:   Package python3 is not configured yet.  dpkg: error processing package gconf2 (--configure):  dependency problems - leaving triggers unprocessed dpkg: dependency problems prevent processing triggers for gconf2:  gconf2 depends on python3:any; however:   Package python3 is not configured yet. #^^^ These dpkg errors repeat maybe 50 times, I have edited out most repeats #    for your sake dpkg: error processing package gconf2 (--configure):  dependency problems - leaving triggers unprocessed No apport report written because MaxReports is reached already                                                               dpkg:   dpkg: error processing package gconf2 (--configure):  dependency problems - leaving triggers unprocessed No apport report written because MaxReports is reached already                                                               dpkg: dependency problems prevent processing triggers for gconf2:  gconf2 depends on python3:any; however:   Package python3 is not configured yet.  dpkg: error processing package gconf2 (--configure):  dependency problems - leaving triggers unprocessed No apport report written because MaxReports is reached already                                                               dpkg: too many errors, stopping Errors were encountered while processing:  gconf2  gconf2 #...  gconf2  gconf2 Processing was halted because there were too many errors. E: Sub-process /usr/bin/dpkg returned an error code (1)  #Next I tried (with no success) the solution outlined here: http://askubuntu.com/questions/434742/cannot-install-python3-after-dist-upgrade  [email protected]:~$ sudo nano /usr/lib/python3.3/sre_constants.py  [email protected]:~$ sudo nano /usr/lib/python3.5/sre_constants.py  [email protected]:~$ sudo nano /usr/lib/python3.5/sre_parse.py  [email protected]:~$ sudo nano /usr/lib/python3.5/sre_compile.py  Use "fg" to return to nano.  [1]+  Stopped                 sudo nano /usr/lib/python3.5/sre_compile.py  [email protected]:~$ sudo nano /usr/lib/python3.5/sre_compile.py  [email protected]:~$ sudo apt-get -f install  Reading package lists... Done Building dependency tree        Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required:   libasn1-8-heimdal libgssapi3-heimdal libhcrypto4-heimdal   libheimbase1-heimdal libheimntlm0-heimdal libhx509-5-heimdal   libkrb5-26-heimdal libroken18-heimdal libwind0-heimdal linux-sound-base Use 'sudo apt autoremove' to remove them. The following additional packages will be installed:   gnupg2 Suggested packages:   gnupg-doc parcimonie xloadimage The following packages will be upgraded:   gnupg2 1 upgraded, 0 newly installed, 0 to remove and 969 not upgraded. 70 not fully installed or removed. Need to get 0 B/1,389 kB of archives. After this operation, 3,555 kB of additional disk space will be used. Do you want to continue? [Y/n] Y dpkg: dependency problems prevent processing triggers for gconf2:  gconf2 depends on python3:any; however:   Package python3 is not configured yet.  dpkg: error processing package gconf2 (--configure):  dependency problems - leaving triggers unprocessed dpkg: dependency problems prevent processing triggers for gconf2:  gconf2 depends on python3:any; however:   Package python3 is not configured yet.  dpkg: error processing package gconf2 (--configure):  dependency problems - leaving triggers unprocessed dpkg: dependency problems prevent processing triggers for gconf2:  gconf2 depends on python3:any; however:   Package python3 is not configured yet.  dpkg: error processing package gconf2 (--configure):  dependency problems - leaving triggers unprocessed dpkg: dependency problems prevent processing triggers for gconf2:  gconf2 depends on python3:any; however:   Package python3 is not configured yet. #^^^ These dpkg errors repeat maybe 50 times, I have editted out most repeats #    for your sake  dpkg: error processing package gconf2 (--configure):  dependency problems - leaving triggers unprocessed No apport report written because MaxReports is reached already                                                               dpkg: too many errors, stopping Errors were encountered while processing:  gconf2 #...  gconf2  Processing was halted because there were too many errors. E: Sub-process /usr/bin/dpkg returned an error code (1)   [email protected]:~( 

What is the problem here and how to fix it?

Replay

Category: package management Time: 2016-07-28 Views: 1

Related post

iOS development

Android development

Python development

JAVA development

Development language

PHP development

Ruby development

search

Front-end development

Database

development tools

Open Platform

Javascript development

.NET development

cloud computing

server

Copyright (C) avrocks.com, All Rights Reserved.

processed in 0.221 (s). 12 q(s)